This special stainless blast media (Ni = 13%) offers the same advantages as CHRONITAL.
Due to its higher nickel content, it remains non-magnetizing following work hardening.

CHRONITAL 13 is suitable for use in centrifugal wheel blast machines as well as air blast systems and finds use
in cleaning, deburring, hardening, descaling, roughening and surface improvement of:

  • Stainless castings
  • Stainless forgings
  • Stainless profiles and wire
  • Stainless equipment fabrication and various stainless components

Areas of Application CHRONITAL 13

Technical Data

Chemical Composition: C < 0,17%, Cr 18 - 19%, Ni ~ 13%, Si < 3,0%, Mn < 2,0%
Microstructure: Austenitic
Hardness: As produced  ~ 275 HV (28 HRC)
  Operating mix  ~ 475 HV (48 HRC)
Apparant density: ~ 4,7 g/cm3
   

 

Available Grain sizes

CHRONITAL 13 mm CHRONITAL 13 mm
S 10 0,05 - 0,20 S 60 0,70 - 1,20
S 20 0,09 - 0,32 S100 1,00 - 1,40
S 30 0,14 - 0,50 S 150 1,25 - 1,70
S 40 0,40 - 0,80 S 200 1,40 - 2,00
S 50 0,60 - 1,00 S 300 1,70 - 3,00

 Special screenings available upon request. Contact us.

Packing Options

25 kg plastic bag, 500kg per EUR Pallet
500 kg big bag
750 kg metal drum